Siemens Profiset 3030 - Date and Time Settings; PABX Trace Log

Step by step
Miscellaneous functions
112
Select a programmable key. If the key is already as-
signed, the programmed function will be overwritten.
p Enter the extension number (e.g. 11/101), external num-
ber, Call group (CG) (for example: 770) or Hunt group
(HG) (for example: 780).
Date and time settings
If authorized, you can set the HiPath 1100 date and
time. The date and time can be shown on your system
telephone display.
Press to access the Service menu.
Select and confirm.
p Enter the date (day, month and year) in a 6-digit format.
For example, 110903 for November 9, 2003.
Confirm.
or If you make a mistake:
Select and confirm. All digits that were entered will be
deleted.
p Enter the time (hour and minutes) in a 4-digit format. For
example, 0905 for 9:05 am. or 1430 for 2:30 p.m.
Confirm.
or If you make a mistake:
Select and confirm. All digits that were entered will be
deleted.
PABX Trace log
When an extension number is programmed, the
key will light up to indicate whether or not the ex-
tension is being used or called.
The extensions are not set up to seize a call that
is ringing in a Call group (CG) or Hunt group (HG)
MORE FEATURES ?
SET SYSTEM CLOCK
SAVE?
PREVIOUS?
SAVE?
PREVIOUS?