Siemens Profiset 3030 - External; When There Is no Answer

Functions used when receiving calls
61
Step by step
p
Enter the number for the
1. Extension you want to call (e.g., 11/101).
2. UCD subscriber group for voice mail (e.g., 790).
3. Call group (e.g 770)
Confirm.
External
1
The external call forwarding feature allows calls made to
a specific extension to be forwarded to an external
number.
Select and confirm.
or
qee Enter the code for call forwarding.
p Enter the number for accessing an external line:
1. Fo r e x a m p l e , 0 ;
2. A group of external lines (e.g., 890).
w Wait for a dial tone.
p Enter the number you want to call.
Confirm.
When there is no answer
2
The call forward no answer feature allows rerouting a
call made to a specific extension to another extension,
a voice mail subscriber group or an external number, af-
ter a specified timeout that can be pre-programmed or
if busy.
Press to access the Service menu.
Select and confirm.
SAVE?
[1] Call forwarding on an analog line times out after 5 minutes of con-
versation. Call forwarding does not take place when the external
destination number is busy. When a call is forwarded by the inter-
nal entrance telephone, it is disconnected after 1 minute of conver-
sation.
FWD ON ?
SAVE?
[2] The call rings at the destination extension until the preset timeout
expires (see Programming manual, Programming an extension -
call forward no answer) or is forwarded immediately if busy.
MORE FEATURES?
*14=CFNR ON?