Siemens Profiset 3030 - Accessing a Feature; Using a Code; Directly; Using the Service Menu

Step by step
How to use this manual
12
Accessing a Feature
... Using a Code
HiPath 1100 features can be activated by entering the
appropriate codes directly on the telephone. For ex-
ample, in the case of the do not disturb feature:
qmk Enter the code to enable do not disturb.
rmk Enter the code to deactivate do not disturb.
Feature activation codes always start with the * charac-
ter key. Deactivation codes always start with the # key.
... Directly
Certain features can be selected directly, for instance:
Select and confirm by pressing .
Certain features may be selected directly during a
call, under certain conditions. For example, a call to a
busy extension:
Confirm the selection by pressing .
or
Select and confirm by pressing .
... Using the Service menu
To make these selections you must first press the Fea-
ture key and chose an option, for example: "#0=RESET
SRVC.?"
Select the Feature key to enter the Service menu.
Select and confirm by pressing .
In the Service menu, under "MORE FEATURES?", there
are additional options available. For example,
"*11=FWD. ON?". These options are also available
when the phone is in Sleep Mode or during calls, but
without the code.
Select the Feature key to enter the Service menu.
Select and confirm by pressing .
Select and confirm by pressing .
FWD ON.?
RECALL?
CONSULT?
#0=RESET SRVC.?
MORE FEATURES ?
*11=FWD ON.?