Siemens Profiset 3030 - Activating Receipt of an Internal MWI

Step by step
Functions used when receiving calls
68
Confirm.
or
Select and confirm.
Programming a key as a MWI for the external server
1
A programmable telephone key is assigned as an indi-
cator for a new message in the mailbox by using an ex-
ternal voice mail server.
Press to access the Service menu.
Select and confirm.
or
qme Enter the programming code a key.
Select a programmable key.
Confirm.
Select and confirm.
Confirm.
or
Select and confirm.
Activating receipt of an Internal MWI
2
When a subscriber group is programmed as a VMIe
group Interface, it becomes a voice mail subscriber
group that can be activated for signaling the moment a
new message is waiting (see Programming an exten-
sion - VMIe group Interface in the programming manu-
al). This is the only group with permission to deactivate
the internal MWI.
Press to access the Service menu.
SAVE?
ANOTHER KEY?
[1] When this key is pressed, the message "XTRN WAIT MSG" will ap-
pear on the system telephone display.
*91=PROG KEY?
CHANGE KEY?
MAILBOX?
SAVE?
ANOTHER KEY?
[2] When all mailboxes of the Internal voice mail system are busy, the
call is forwarded to the UCD subscriber group queue assigned to
voice mail.
Remember: It is not possible to transfer calls to the voice mail sys-
tem.