Siemens Profiset 3030 - Relay; Relay Status Check

Step by step
Miscellaneous functions
88
Relay
1
The relay on the HiPath 1120 music module is used to
control all peripheral equipment, such as the door open-
er, etc.
Press to access the Service menu.
Select and confirm.
or
or
qmd or rmd Enter the code to enable or deactivate the relay.
If a Fax/DID feature was configured...
The relay can be controlled by a remote MF telephone
Required: The remote telephone must have a conversa-
tion in progress with the system’s programming exten-
sion.
Press to access the Service menu.
Select and confirm.
or
or
qmd or rmd Enter the code to enable or deactivate the relay.
p Enter the system password at the remote telephone
(the default is: 31994).
Relay status check
This feature allows you to check if the relay is ON or
OFF.
Required: System telephone with a display.
Press to access the Service menu.
Select and confirm.
[1] Enable (contacts closed) or Deactivate (contacts open) the relay im-
mediately or after a specified time (see Relay and Sensors in Pro-
gramming manual, HiPath 1120).
*90=RELAY ON?
*90=RELAY OFF?
*90=RELAY ON?
*90=RELAY OFF?
MORE FEATURES ?