Using the HiPath 1100 Features
14
Using the HiPath 1100 Features
Considerations
The descriptions and explanations of all available features HiPath 1100 are based on a
Profiset 3030 system telephone.
Check specific procedure to be followed for the different system telephone models. For in-
formation on how to configure each model, refer to the manufacturer’s Instructions Manual.
For information on basic functions refer to the Quick Reference Guide for system telephones.
The information in this document provides only general descriptions of the features. The
actual features may not correspond exactly to the descriptions herein and, furthermore,
they are subject to changes to the extent that products continue to be developed.
The selection of features to be provided is not binding unless explicitly established in the
terms of the contract.
Numbering Plan
A Numbering Plan assigns extensions, external lines, and groups - as well as other numbers
that can be selected with features and programming codes - to execute specific functions.
Note:
The number of external lines and extensions available depends on the system’s configura-
tion.
Description HiPath 1120 HiPath 1150 HiPath 1190
External line 801 to 808 801 to 832 801 to 845
Extension, including S
0
11 to 30 11 t o 60
610 to 645
101 to 240
Groups of external lines 0 or 890 to 899
Call Groups (CG) 770 to 779
Hunt Groups (HG) 780 to 789
UCD Subscriber Groups 790 to 799
Carrier 9
EVM - Default internal number 790
EVM - Message ports 7491 and 7492
EVM - Virtual ports 744 to 747
Fax/DID - Virtual ports for messages 740 to 743
USB/CAPI line 10 100
Substitution for * and # 75 and 76 (accordingly)
To Next Page
Loading...
