Siemens Profiset 3030 - Timer for Outgoing External Calls; Timeout for External Calls

Step by step
Functions used for making calls
40
w s Wait for the call to be answered. Start conversation.
Timer for outgoing external calls
1
This setting specifies a maximum time for the duration
of an outgoing external call for each extension.
The time count starts upon connection of a call and it
never restarts while the call is in progress (e.g., when
there is a transfer). Once the specified time expires, the
call is automatically disconnected.
Required: This feature must have been configured and
activated for the extension.
p Enter an external number.
w s Wait for the call to be answered. Start conversation.
w Timer for the specified time period is initiated.
Before a call is disconnected by the timer, a 10-second
warning tone is sent to the extension and the message
"TIME EXCEEDED" is shown on the display.
t Once the specified time has elapsed the call is discon-
nected.
Timeout for external calls
2
The "timeout for external calls" feature defines a time
"credit" for an extension to make external calls. In other
words, when the total time of the external calls made
reaches the time limit set for calls underway, these calls
will be interrupted and no further calls may be made un-
til more time "credit" is awarded.
When the LCR or ACS is activated, the exten-
sions receive a false line tone for external dialing.
[1] See Programming an extension - Timer for outgoing external calls,
in the programming manual
TIME EXCEEDED
[2] See programming manual - Programming the extension - Timeout
for external calls.