Siemens Profiset 3030 - Answering a Call on Hold

Step by step
Functions used when receiving calls
58
The display shows the caller’s number, if Caller ID has
not been blocked by the caller. On the HiPath 1100, if
you record a name associated to the number the name
will also be displayed (if so configured by your system’s
support technician).
...Using the Handset
The extension rings. The display shows the Caller ID in-
formation.
n Lift the handset.
...Using the speakerphone
The extension rings. The display shows the Caller ID in-
formation.
Press the SPEAKER key.
Answering a call on hold
If there is an intermittent signal in the background when
a conversation is in progress, it means there is a second
or an urgent call being made to that extension.
Required: A call must be in progress.
Select and confirm.
or
Press to access the Service menu.
qii Enter the code for answering a call.
or
Press the "CALL WAITING" key.
or
Select and confirm.
or
Press to access the Service menu.
qf Enter the code to switch between two calls.
w s Wait for the call to be answered. Start conversation.
w The first call is put on hold.
<<

>>
<<

>>
CALL WTNG?
CALL WAITING
TOGGLE?