Functions used for making calls
31
Step by step
Recall
1
This feature allows you automatically to place a call to an
extension or external number (over an ISDN line) that is
unavailable at the moment. The call will go through as
soon as the line is available.
Required: The destination number is not available.
Callback due to no answer/busy
Confirm.
or
qil Enter the code to confirm the recall.
or
Wait 7 s
w Wait 7 seconds (if configured, Recall will be automati-
cally activated).
w Wait for a confirmation tone.
t or Replace the handset or press the SPEAKER key
w Wait for the recall.
If Callback has been deactivated during configura-
tion, do the following to enable it:
2
:
Wait a few seconds until the display shows "RECALL
ON." and the busy signal or the ringing signal stop brief-
ly.
t or Replace the handset or press the SPEAKER key.
w Wait for the recall.
[1] Extension is busy - the system generates a recall as soon as a line
is available.
Extension is free - the system generates a recall once the caller has
returned to the station and made a call.
External number is busy - The system generates a recall as soon
as the destination number is free. This feature must be activated
by the carrier and the system needs to have an S
0
module in-
stalled.
Only one recall can be activated for each extension. A new recall
cancels the previous one.
RECALL?
[2] (See Activating Callback/Urgent Call with timeout, in the program-
ming manual)
RECALL ON.?
To Next Page
Loading...
