Miscellaneous functions
113
Step by step
PABX Trace is a tool used to monitor the events that
have occurred in the PABX during a certain period.
These events are defined while the system is being pro-
grammed using the programming code (code 246) or
using HiPath 1100 Manager.
This information can be downloaded using the HiPath
1100 Manager so that the support technician can check
the system.
Start/Stop PABX Trace log
The information will be saved in a volatile memory.
qekk Enter the code to enable the trace.
or
rekk Enter the code to deactivate the trace.
Activating/deactivating extended Trace log
The information will be saved in a non-volatile memory.
qekl Enter the code to enable the extended trace.
or
rekl Enter the code to deactivate the extended trace.
After switching off or updating data you do not
need to reconfigure the trace, although only the
configuration and the status will be saved. The
data will be lost when any of these events occur.
To Next Page
Loading...
