Functions used when receiving calls
73
Step by step
w s Wait for the voice mail to answer the call.
Follow the voice mail prompts to make your selections.
In another internal extension
kmd Enter the code for "Entry voice mail" (default = 790)
p Enter your personal mailbox password (default = 1234).
p Enter your mailbox number (the same as your internal
extension number).
w s Wait for the voice mail to answer the call.
Follow the voice mail prompts to make your selections.
In an external telephone
p Connect to your HiPath 1100.
Enter the MSN designated to your EVM by the system’s
support technician (check with the support technician).
or If call forwarding to Entry voice mail is activated:
p + q Enter your external number (MSN) and press the Aster-
isk (*) key during the message playback.
p Enter your personal mailbox password (default = 1234).
p Enter your mailbox number (the same as your internal
extension number).
w s Wait for the voice mail to answer the call.
Follow the voice mail prompts to make your selections.
If your HiPath 1100 is configured "...Using auto-
matic seizure of an activated external line" (con-
sult the system’s support technician), press the
Flash key before selecting your mailbox.
In DEC telephones, use "Suffix dialing" (MF)
Æ page 54.
To Next Page
Loading...
