Siemens Profiset 3030 - Page 76

Step by step
Functions used when receiving calls
76
If the extension belongs to more than one group
Select and confirm.
or
or
qli or rli Enter your group login (ON) or logout (OFF) code.
or
Press the "GP LOGON/GP LOGOFF" key.
or
If an X appears next to the group number (e.g., 770) it
means that a ringing signal for this group is activated.
If a name has been stored for this group, it will be dis-
played (if configured by the system’s support techni-
cian).
or
If an X does not appear, it means that the ringing signal
is deactivated.
or
p Enter the Call group number.
•
kkd to kkm = Call group (CG);
or
p Enter the Hunt group number.
•
kld to klm = Hunt groups (HG)
Press to confirm. The next number in the group will be
displayed.
or
Select and confirm.
The ringing signal for the group displayed is activated.
or
LOGON/LOGOFF GROUP
JOIN GRP?
LEAVE GRP?
LOGON/LOGOFF GROUP
LOGON/LOGOFF GROUP
770 X (Name)
770 (Name)
NEXT?
JOIN GRP?