Siemens RX1400 - Backup-Files (Backup Files); Full-Configuration-Save

Chapter 6
RUGGEDCOM ROX II Actions
RUGGEDCOM NETCONF
Reference Guide
60 backup-files (Backup Files)
</rpc>]]>]]>
• {fileType}
The type of file to copy to the device. Must be one of the following: config, featurekey,
elancertificate, ipseccertificate, cacertificate, or crlfiles.
• {url}
The URL and filename of the RUGGEDCOM NETCONF file to copy. The file transfer supports SCP, SFTP, FTPS,
and HTTP. The URL format is protocol://user:password@host:port/path-to-file. If the port is not
specified, the device uses the default port for the protocol.
Section6.1.14
backup-files (Backup Files)
This action copies files from the device to a specified URL. Parameters include <file-type>, <file>,
<timestamp>, and <url>.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<admin xmlns="http://ruggedcom.com/ns/rmf_admin">
<backup-files>
<file-type>{fileType}</file-type>
<file>{file}</file>
<timestamp>{timeStamp}</timestamp>
<url>{url}</url>
</backup-files>
</admin>
</data>
</action>
</rpc>]]>]]>
• {fileType}
The type of file to copy from the device. Must be one of the following: config, featurekey,
elancertificate, ipseccertificate, cacertificate, or crlfiles.
• {file}
The name of the file to copy.
• {timeStamp}
A Boolean value: true or false. When true, the system appends a timestamp to the filename. This option
does not apply if the file name contains an * (asterisk) character.
• {url}
The URL to which to copy the file. The file transfer supports SCP, SFTP, FTP, and HTTP. The URL format is
protocol://user:password@host:port/path-to-file/. Note that the URL must end with a / (forward
slash_ character. If the port is not specified, the device uses the default port for the protocol.
Section6.1.15
full-configuration-save
This action saves the RUGGEDCOM ROX II configuration in the specified format to a specified file. Files are saved to
the /var/lib/config directory on the device. Parameters include <format> and <file-name>.