Siemens RX1400 - Remove-Crl (IPSEC)

Chapter 6
RUGGEDCOM ROX II Actions
RUGGEDCOM NETCONF
Reference Guide
76 remove-crl (IPSEC)
Section6.5.8
remove-crl (IPSEC)
This action removes the specified crl file from the IPSec configuration. Specify the crl file name in the <name>
element. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<tunnel xmlns="http://ruggedcom.com/ns/rmf_iftunnel">
<ipsec>
<certificate>
<crl>
<crls>
<name>{crlFileName}</name>
<remove-crl/>
</crls>
</crl>
</certificate>
</ipsec>
</tunnel>
</data>
</action>
</rpc>]]>]]>
• {crlFileName}
The name of the crl file to remove.