Siemens SCALANCE W786-1 RJ-45 User Manual

Configuring with Web Based Management
6.4 "Information" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
142 Configuration Manual, 08/2018, C79000-G8976-C267-13
●
Allocation Method
Shows whether the IPv4 address was assigned statically or dynamically. You configure
the static entries in "System > DHCP > Static Leases".
●
Binding State
Shows the status of the assignment.
– Assigned
The assignment is used.
– Not used
The assignment is not used.
– Probing
The assignment is being checked.
– Unknown
The status of the assignment is unknown.
●
Expire Time
Shows until when the assigned IPv4 address is still valid. Up to this time, the DHCP client
must either request a new IPv4 address or extend the lease time of the assigned IPv4
address.
6.4.12
SNMP
This page displays the created SNMPv3 groups. You configure the SNMPv3 groups in
"System > SNMP".
Description
The table has the following columns:
●
Group Name
Shows the group name.
●
User Name
Shows the user that is assigned to the group.

Siemens SCALANCE W786-1 RJ-45 Specifications

General

Brand	Siemens
Model	SCALANCE W786-1 RJ-45
Category	Wireless Access Point
Language	English