Configuring with Web Based Management
6.4 "Information" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
162 Configuration Manual, 08/2018, C79000-G8976-C267-13
●
Shows which iFeatures are used.
– -
iFeatures are not used.
– iPCF
– iPCF-HT
– iPCF-MC
– iPRP
– iREF
– AeroScout
●
Shows the status of the WLAN interface.
– enabled
The WLAN interface is enabled.
– disabled
The WLAN interface is disabled.
Available APs
Available access points
Note
This page is only available for clients or access points in client mode.
This page shows all the access points visible to the client. The list also includes the access
points to which the client cannot connect due to its configuration.
Note
Display when iPCF mode is activated
If the iPCF mode is active with a SCALANCE W700, the display is different. Since th
e client
does not run a background scan in this case, only the access point with which the client is
currently connected is displayed.
To Next Page
Loading...
Need help?
General
