Configuring with Web Based Management
6.9 "Security" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
363
●
Enter the new password for the selected user.
●
Enter the new password again to confirm it.
1. In the "Current User Password" enter the valid password of the currently logged in user.
2. From the "User Account" drop-down list, select the user whose password you want to
change.
3. Enter the new password for the selected user in the "New Password" input box.
4. Repeat the new password in the "Password Confirmation" input box.
5. Click the "Set Values" button.
Note
The factory settings for the passwords when the devices ship are as follows:
admin: admin
log in for the first time or following a "Restore Factory Defaults and Restart",
with the preset user "aadmin" you will be prompted to change the password.
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this c
hange is saved immediately.
On this page, you specify which password policy will be used when assigning new
passwords.
To Next Page
Loading...
Need help?
General
