Configuring with Web Based Management
6.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
246 Configuration Manual, 08/2018, C79000-G8976-C267-13
The page contains the following boxes:
●
Select this check box to enable automatic time-of-day synchronization with NTP.
●
Shows the current date and current normal time received by the IE switch. If you specify
a time zone, the time information is adapted accordingly.
●
Last Synchronization Time
Shows when the last time-of-day synchronization took place.
●
Last Synchronization Mechanism
Shows how the last time synchronization was performed. The following methods are
possible:
– Not set
The time was not set.
– Manual
Manual time setting
– SNTP
Automatic time-of-day synchronization with SNTP
– NTP
Automatic time-of-day synchronization with NTP
– SIMATIC
Automatic time-of-day synchronization using the SIMATIC time frame
●
In this box, enter the time zone you are using in the format "+/- HH:MM". The time zone
relates to UTC standard world time.
The time in the "Current System Time" box is adapted accordingly.
To Next Page
Loading...
Need help?
General
