Configuring with Web Based Management
6.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
265
The page contains the following boxes:
●
Enter the IPV4, IPv6 address or the FQDN (Fully Qualified Domain Name) of the device.
●
Enter the number of ping requests.
●
Select the IP address type in which an entered FQDN will be resolved.
– Auto
In this mode, the IP address type is selected automatically.
– IPv4
The entered FQDN will be resolved in an IPv4 address.
– IPv6
The entered FQDN will be resolved in an IPv6 address.
●
This selection is only required when the destination address is a multicast or a link local
address.
– "-" (factory setting)
– Select the relevant IPv6 interface.
●
Click this button to start the ping function.
●
This box shows the output of the ping function.
To Next Page
Loading...
Need help?
General
