Configuring with Web Based Management
6.9 "Security" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
381
The table has the following columns:
●
Shows the security context.
●
Enter the user name with which you want to log on to the RADIUS server.
●
Enter the password for the user name selected above. The client logs on with the
RADIUS server using this combination.
For password assignment, ASCII code 0x20 to 0x7e is used.
●
Dot1x User Password Confirmation
Confirm the password.
●
Specify whether or not the RADIUS server identifies itself to the client using a certificate.
●
Specify the authentication methods. The following methods exist:
– Auto
Client offers RADIUS server all methods.
– EAP-TLS
Extensible Authentication Protocol - Transport Layer Security
Uses certificates for authentication.
– EAP-TTLS
Extensible Authentication Protocol - Tunnel Transport Layer Security
After setting up the TLS tunnel, MS-CHAPv2 is used for internal authentication.
– PEAP
Protected Extensible Authentication Protocol
Alternative draft protocol of IETF for EAP-TTLS
To Next Page
Loading...
Need help?
General
