Introduction
1.7 Protective mechanisms against manipulation
PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
11
See also
Applying supply voltage (Page 56)
Applying the measuring voltage (Page 58)
Applying the measuring current (Page 59)
1.7 Protective mechanisms against manipulation
Note
Risk of manipulation
Several protective mechanisms can be activated in the device.
In order to reduce the risk of manipulation
occurring on the device, it is recommended that
the protective mechanisms available in the device are activated:
Password protection, to protect device against unintentional adjustment of parameters.
Hardware write protection, to effectively prevent changes to the device parameters
without physical access to the device.
For further information, please refer to chapter Parameterizing via the operator interface
(Page 70).
To Next Page
Loading...
