Siemens SENTRON PAC3120 - Advanced; Password

Parameter assignment
7.2 Parameterizing via the operator interface
PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
83
7.2.8 Advanced
7.2.8.1 Password
Password protection prevents the following actions:
● Changing of device settings, including password
● Changing and deletion of values
● Deletion of data and memory content
● Setting and resetting of counts
● Resetting to factory settings
Reading out of measured values and memory content is possible without restriction when
password protection is active.
Note
It is possible to define in the menu whether the password protects only the display or
the
communication interfaces
, or whether it
simultaneously
protects the display and the
communication interfaces.
Selection
Range
Factory setting
DISPLAY Password protection prevents write access via
the device interface.
• ON: Password protection active
• OFF: Password protection deactivated
OFF
COMMUNICATION Password protection prevents write access via
the communication interfaces.
• ON: Password protection active
• OFF: Password protection deactivated
OFF
PASSWORD
0000 … 9999
0000
Note
If you have forgotte
n the password, please contact Technical Support. You will be issued
with a new password.