PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
69
7.1 Introduction
Device settings
The chapter headed "Parameterizing" describes the device settings. These include:
● Adjustment to the physical conditions of use
● Integration into the communication system
● Country-specific settings, ergonomics, device protection
It is possible to set the device by means of:
● The operator interface of the device
● Powerconfig configuration software
Note
Protection of the device settings
As delivered, the device settings are not protected. At startup, a password should be
assigned and the device protection activated to guard against unauthorized
or inadvertent
To Next Page
Loading...
