Siemens SENTRON PAC3120 - Basic Parameters: Current Input; Date and Time Settings

Parameter assignment
7.2 Parameterizing via the operator interface
PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
71
7.2.1 Device information
The device information cannot be modified.
Device information
7KM3x20-xBA01-1xA0
Article number of the device
PAC3x20
Device designation
S/N: LQN/230823xxxxxx
Serial number of the device
D/T: xxxxxx Date code
ES: xxx
Hardware revision level
SW-REV: xxxx
Firmware revision level
BL-REV: xxxx
Boot loader revision level
LP-REV: xxxx
Language pack revision level
7.2.2 Language
The language of menu-based operation and of the measured value displays can be set in
the "Language" menu item.
Selection
Range
Factory setting
Language
• Chinese
• German
• English
• French
• Italian
• Portuguese
• Polish
• Russian
• Spanish
• Turkish
English
Phase labels
• L1 L2 L3
• a b c
L1 L2 L3