Parameter assignment
7.2 Parameterizing via the operator interface
84
PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
7.2.8.2 Write protection
The hardware write protection prevents write access to the device, both via the
communication interface and on the display.
In order to gain write access, the hardware write protection must be deactivated directly on
the device. The hardware write protection cannot be deactivated via a communication port.
The user must adjust the position of the write protection slider on the rear panel of the device
in order to activate or deactivate the hardware write protection function.
To Next Page
Loading...
