EasyManua.ls Logo

Siemens SENTRON PAC3120 - Device Security Features

Siemens SENTRON PAC3120
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Description
2.1 Features
16
PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
Security
Hardware write protection
Password protection
Device access control (IP filter) (PAC3220 only)
Configurable Modbus TCP port (PAC3220 only)
DHCP protocol included (PAC3220 only)
SNTP protocol included (PAC3220 only)
Lead seals can be attached
Using "Password protection" and "Hardware write protection", you can protect against write
access to the device settings. The protection takes effect in case of the following actions:
Modify parameters in device
Reset maximum
Reset minimum
Reset counter
Reset device
Reset device to factory defaults
Reset password
Update firmware on device
The data can be read without any restrictions.
Note
Activation of the hardware write protection
When the power monitoring device is connected to a network, it is recommended th
at the
hardware write protection is activated.

Table of Contents

Related product manuals