Mounting
36
PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
Installation space and ventilation
Sufficient clearance must be maintained between the device and neighboring components in
order to comply with the permissible operating temperature. You can find dimension
specifications in chapter Dimensional drawings (Page 109).
Deploy the power monitoring device only where environmental conditions permit its
operation: A description of permissible operating conditions can be found in chapter
Technical data (Page 95).
Plan additional space for:
● Ventilation
● Wiring
● Connection of the communication cable and cable infeed on the top of the device
The use of a damaged device may result in death, serious physical injury, or property
damage.
Do not install or start up damaged devices.
Note
Avoid condensation.
Sudden fluctuations in temperature can lead to condensation. Condensation can affect the
proper functioning of the device. Store the device in the operating room for at least two hours
before commencing installation.
To Next Page
Loading...
