Siemens SENTRON PAC3120 - Communication Settings

Parameter assignment
7.2 Parameterizing via the operator interface
78
PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
LED
Selection
Range
Factory setting
ACTION
• OFF:
The LED is switched off.
• DEVICE ON:
The LED signals that the device is switched
on.
The brightness of the LED changes gradually.
• REMOTE CONTROL:
The LED signals remote access to the device.
The color of the LED can be freely chosen
from a selection of colors. The lighting behav-
ior of the LED can be selected from a range of
options.
• DIRECTION OF ROTATION:
The LED reacts to the direction of rotation of
the electrical field.
The color of the LED can be freely chosen
from a selection of colors. The lighting behav-
ior of the LED can be selected from a range of
options.
• PULSE:
The LED outputs 1000 LED pulses per energy
unit.
The color of the LED can be freely chosen
from a selection of colors.
• REMOTE COLOR:
The LED can be switched on by a Modbus
command.
• DI STATUS:
The LED signals the status of the digital input.
The color of the LED can be freely chosen
from a selection of colors. The lighting behav-
ior of the LED can be selected from a range of
options.
PULSE
PULSES
(with PULSE only)
Number of pulses to be output per unit. The ref-
erence unit is defined in the "UNIT" field.
1000 (not variable)
1000
TIMEOUT
(with REMOTE CONTROL
and REMOTE COLOR only)
The LED switches off at the end of the defined
timeout period.
0 … 18000 s
0 s
BRIGHTNESS Luminous intensity of the LED
0 … 4
4