Siemens SICAM - Page 159

Modbus Register Address Parameter Individual Test Value
1041 3-phase power factor 3666
1042 3-phase active power 3777
1043 3-phase reactive power 3888
1044 3-phase apparent power 3999
1045 Active import energy 4111
1046 Active import energy 4222
1047 Active export energy 4333
1048 Active export energy 4444
1049 Reactive import energy 4555
1050 Reactive import energy 4666
1051 Reactive export energy 4777
1052 Reactive export energy 4888
1053 Firmware major and maintenance version
number
4999
1054 Application firmware and build version
number
5111
1055 Boot-loader major and maintenance version
number
5222
1056 Boot-loader firmware and build version
number
5333
1057 Ground-fault Status Register 5444
1058 Phase current I
1
5555
1059 Phase current I
2
5666
1060 Phase current I
3
5777
1061 Ground current I
N
5888
Table B-20 Analaog Input Register: Overvoltage/Undervoltage/Overcurrent Alarm and Warning
Modbus Register Address Parameter Individual Test Value
1 Last_Reset_Type 1
2 Last_Reset_Time_SS 2
3 Last_Reset_Time_HH_MM 3
4 Last_Reset_Time_MO_DD 4
5 Last_Reset_Time_YY 5
6 OV_Alarm_Type 6
7 OV_Alarm_Time_SS 7
8 OV_Alarm_Time_HH_MI 8
9 OV_Alarm-Time_MO_DD 9
10 OV_Alarm_Time_YY 10
11 OV_Warning_Type 11
12 OV_Warning_Time_SS 12
13 OV_Warning_Time_HH_MI 13
14 OV_Warning_Time_MO_DD 14
15 OV_Warning_Time_YY 15
16 UV_Alarm_Type 16
17 UV_Alarm_Time_SS 17
18 UV_Alarm_Time_HH_MI 18
19 UV_Alarm-Time_MO_DD 19
Modbus Registers
B.9 Self-Test Mode
SICAM, Feeder Condition Monitor, Manual 159
E50417-H8940-C580-A4, Edition 03.2019