Siemens SICAM User Manual

Parameterizing the User Interface
This chapter describes the default menu and the possible parameter settings that you can perform with the
user interface.
Default Menu
The default menu displays the following parameters:
•
Phase currents I
1
, I
2
, I
3
•
Ground current I
N
•
Voltage values V
1
, V
2
, V
3
•
Frequency
By navigating with the keys, you can view the following parameters:
•
Phase-to-phase voltages
•
1-phase active power
•
1-phase reactive power
•
1-phase apparent power
•
3-phase active power
•
3-phase reactive power
•
3-phase apparent power
•
Phase sequence
•
Zero sequence voltage
•
Positive-sequence voltage
•
Negative-sequence voltage
The default menu also displays the power-flow direction and status of the feeder.
A.2
Parameterization
A.2 Parameterizing the User Interface
SICAM, Feeder Condition Monitor, Manual 83
E50417-H8940-C580-A4, Edition 03.2019

Siemens SICAM Specifications

General

Measurement Accuracy	±0.1%
Input Current Range	0-5A AC/DC
Frequency Range	45-65Hz
Communication Interfaces	Ethernet, RS485
Power Supply	24 V DC
Protection Class	IP20