[dw_sfcmbfmrps-140314, 3, en_US]
Figure 4-28 Remove Power Source
NOTE
If the device is powered OFF without enabling the Battery Freshness Mode, then:
•
Device HMI displays the message Battery is being discharged, enable battery freshness mode and
•
The Fault LED (Red) and Communciation LED (Yellow) flash for 30 min.
Device Functions
4.1 Description
60 SICAM, Feeder Condition Monitor, Manual
E50417-H8940-C580-A4, Edition 03.2019
To Next Page
Loading...
