Product Features Description
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
3.3. Product Variants and Options
The Sicore II camera is available in a wide number of variants and can be factory configured
with the following options:
Variant Description
1 Twin Camera – Mono/IR + Colour Overview
2 Twin Camera – Mono/IR + Mono/IR Overview
3 Single Camera – Mono/IR
Table 4 – Table of Base Variants
Option Description
1 3G/4G Modem module with antenna
2 WiFi module with antenna
3 8GB solid state storage module \
4 16GB solid state storage module |
5 32GB solid state storage module | Only one can be fitted
6 64GB solid state storage module |
7 128GB solid state storage module /
8 12.5mm Lens
9 16mm Lens
10 25mm Lens
11 35mm Lens
12 Grey sun shield
13 Yellow sun shield
Table 5 – Table of Options
Each Sicore II has two part numbers located on the rear of the camera.
The formal, orderable, part number is of the form S24745 –XXXXX-XXXX. This is the number
which must be quoted when ordering a camera.
To allow easy identification of the camera, there is also a ‘Human Readable’ part number
included on the rear of the camera. The structure of this is described in Appendix C
Please contact Siemens to discuss orderable part numbers for the different
variants using contact details in Section 1.2
To Next Page
Loading...
