System Components
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
5.6.7. Earth Stud
If required, the camera case can be earthed via the rear panel M6 earth stud. If used, a
suitable size earth cable terminated with an M6 ring crimp should be connected to the
system safety earth point.
5.6.8. Status LED
The Status LED provides an indication of the following system states:
• Off – No power or system failed to start
• Flashing – Indicates camera is starting up
• Solid on – Indicates that the camera on and running
To Next Page
Loading...
