Commissioning
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
7.10. License Installation
Licenses are installed onto Sicore II at the time of manufacture and are stored internally on
the camera not accessible to the user.
The installed licences can be viewed by navigating to :
Status and Configuration / Settings / Licence System
The Facilities menu will displayed the items that can be licensed and whether they have a
licence installed.
Selecting Manager and then Read Licences will directly display the installed licenses.
There are two licenses for Sicore II:
ANPR – All cameras will have this licence to enable the ANPR engine.
Enforcement – This enables the Speed, Baseline Position and Encryption functions within the
camera.
If a function is configured but not licensed then a fault will be present in the Fault Table (ref
para. 4.6.4) indicating this.
To Next Page
Loading...
