Installation
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
6.1.3. Tools
The following tools are required when carrying out an installation of a Sicore II camera:
• No.1 Pozi Screwdriver (Insulated)
• Terminal Screwdriver (Insulated)
• Electrical Screwdriver (Insulated)
• 5mm Allen Key
• 6mm Allen Key
• 10mm Socket and Combination or Open ended Spanner
• 13mm Socket and Combination or Open ended Spanner
• 19mm Socket and Combination or Open ended Spanner
• 24mm Socket and Combination or Open ended Spanner
• Torque Wrench
• Electrician's Pliers
• Side Cutters
• Snipe Nose Pliers
• Loctite 270
• Reflective Puck - 3M road 290-W -
6.2. Cabinet Access
If access to the power supply or cabling is required, this may be mounted / terminated in a
suitable cabinet. If using a Siemens cabinet, one or more of the following will be required to
gain access.
Description Part Number
T-bar key 667/2/20234/000
S-18 key – Main Cabinet * 4/MC 289
* - In some areas customers specified keys may be used.
To Next Page
Loading...
