Technical Specification
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
A Appendix - Technical Specification
Inbuilt modes of operation
ANPR – E.g Journey time, Access Monitoring
Enforcement – E.g. Safezone, Tolling
Communications
10/100/1000 Ethernet interface
Isolated RS232 interface with handshaking
Isolated configurable RS422/RS485 interface
Optional 3G/4G modem
Optional WiFi Hot Spot
Use of Radio Spectrum
When fitted with the optional Modem the Sicore II operates in the following bands
GSM/GPRS/EDGE: Dual band, 900/1800MHz
UMTS/HSPA+: Triple band, 900 (BdVIII) / 1800 (BdIII) / 2100MHz (BdI)
LTE: band, 800 (Bd20) / 900 (Bd8) / 1800 (Bd3) / 2600MHz (Bd7)
When fitted with the optional WiFi module the Sicore II operates in the following bands
2412 MHz – 2484 MHz
4910 MHz – 5825 MHz
Inputs and outputs
4 isolated constant current isolated inputs
4 isolated protected open drain outputs
1 isolated solid state changeover relay contact
1 isolated power switch
Other facilities
Timing sources: Internal Crystal, NTP network time server, GPS
Licensed options use encrypted Smart Card
Configuration via web based user interface
To Next Page
Loading...
