Product Features Description
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
4.2.2. Digital Outputs
Four isolated digital outputs are provided. These outputs have the following specification:
• Protected Open Drain outputs *
• Maximum operating voltage: 50V DC
• Maximum operating current: 500mA
• ELV level isolation
• Programmable polarity
• Output 4 can be assigned as sync output function
* - Protection from, over voltage transients, over current and over temperature operation.
4.2.3. Power Switch
This interface provides a mechanism for switching an externally supplied voltage on or off.
This interface has the following specification:
• Protected solid state single pole switch
• Maximum operating voltage: 24V DC
• Maximum operating current: 500mA
• ELV level isolation
• Programmable polarity
4.2.4. Relay Output
This interface provides an isolated solid state changeover contact. This interface has the
following specification:
• Protected solid state single pole changeover contact
• Maximum operating voltage: 50V DC
• Maximum operating current: 100mA
• TR2523 compatible output
• Fuse protected (factory repair only)
• ELV level isolation
4.3. WiFi Interface
The WiFi interface is a factory fit option and allows the user to connect locally to the cameras
WiFi hotspot using a WiFi device such as a Laptop, Tablet or Smart Phone. The Sicore II
camera WiFi operates on 2.4GHz & 5GHz bands and has a useable range of 10-30m
depending on location and ambient noise floor.
For security purposes the WiFi hotspot is disabled by default, refer to the Sicore II Operating
Instructions Handbook (Ref para. 1.3)
To Next Page
Loading...
