Siemens SIMATIC ET 200AL - Page 108

Accessories/spare parts
C.2 Cables
Distributed I/O system
106 System Manual, 02/2018, A5E31861578-AF
The following table shows the technical properties of the connecting cable for ET-
Connection, PUR cable.
Table C- 11 Connecting cables for ET-Connection, PUR cable
General information
Product type designation CONNECTING CABLE FOR BUS CABLE ET-
CONNECTION, PUR CABLE 0.2 M
Function
To connect two bus cables ET-CONNECTION
Degree of protection and protection class
IP65 Yes
IP67
Yes
Ambient conditions
Ambient temperature during mounting
minimum
-30 °C
maximum
80 °C
Storage/transport temperature
Ambient temperature during transport and storage
minimum
-40 °C
maximum
80 °C
Cables
Cable designation
2Y(ST)C11Y 2x2x0.5/1.0-100-GN
Number of electrical wires
4
Design of shielding Overlapped aluminum-lined sheet, coated with
shielding made of tin plated copper wires
Cable length
0.2 m
Outside diameter of the inner conductor
0.5 mm
Outside diameter of the wire insulation
1.0 mm
Outside diameter of the cable sheath 5 mm
Permissible bending radius
One time bending, min.
20 mm
Multiple bending, min.
40 mm
Constant bending
100 mm
Color of the cable sheath
Green
Color of the wire insulation of the data wires
White, yellow, blue, orange
Weight per length
34 kg/km
Mechanics/material
Type of cable outlet
180° cable outlet
Connector housing material
Metal
Wire insulation material
PE
Cable sheath material
PUR
Material property halogen free
Yes
Material property silicon free
Yes