Wiring
3.3 Configuring PROFIBUS DP address and terminating resistor
Interface module IM 157-1 DP (6ES7157-1AA00-0AB0)
18 Manual, 12/2016, A5E32100641-AD
The figure below shows the rotary coding switches for configuring the PROFIBUS DP
address.
Rotary coding switch for PROFIBUS DP (tens digit)
Rotary coding switch for PROFIBUS DP address (ones digit)
Figure 3-2 Setting the PROFIBUS address
The following table shows how to set PROFIBUS address 26 as an example.
Table 3- 5 Setting of the PROFIBUS address
Tens digit Position 2
Ones digit Position 6
To Next Page
Loading...
