Siemens SIMATIC ET 200AL - Page 577

Technical specifications
Communication module CM 4xIO-Link 4xM12(6ES7147-5JD00-0BA0)
30 Manual, 10/2017, A5E32352322-AE
Article number
6ES7147-5JD00-0BA0
Encoder supply
Number of outputs
4
24 V encoder supply
• Short-circuit protection
Yes; per module, electronic
• Output current, max.
1.4 A; Total current of all ports
Power loss
Power loss, typ.
2.6 W
IO-Link
Number of ports
4
• of which simultaneously controllable
4
IO-Link protocol 1.0
Yes
IO-Link protocol 1.1
Yes
Transmission rate 4.8 kBaud (COM1); 38.4 kBaud (COM2),
230 kBaud (COM3)
Size of process data, input per port
32 byte
Size of process data, input per module
32 byte
Size of process data, output per port
32 byte
Size of process data, output per module
32 byte
Memory size for device parameter
2 kbyte; for each port
Master backup
Possible with function block IO_LINK_MASTER
Configuration without S7-PCT
Possible; autostart/manual function
Cable length unshielded, max.
20 m
Operating modes
• IO-Link
Yes
• DI
Yes
• DQ
Yes; max. 100 mA
Connection of IO-Link devices
• Port type A
Yes; via 3-core cable
• Port type B
Yes; Additional device supply: 1.6 A total current
of all ports
Interrupts/diagnostics/status information
Alarms
• Diagnostic alarm
Yes; Parameterizable
Diagnostic messages
• Monitoring the supply voltage
Yes
• Wire-break
Yes
• Short-circuit
Yes