Siemens SIMATIC ET 200AL - Page 578

Technical specifications
Communication module CM 4xIO-Link 4xM12(6ES7147-5JD00-0BA0)
Manual, 10/2017, A5E32352322-AE
31
Article number
6ES7147-5JD00-0BA0
Diagnostics indication LED
• Channel status display
Yes; Green LED
• for module diagnostics
Yes; Green/red LED
• For load voltage monitoring
Yes; Green LED
Potential separation
between the load voltages Yes
Potential separation channels
• between the channels
No
• between the channels and backplane bus
Yes
• between the channels and the power
supply of the electronics
No
Isolation
Isolation tested with
707 V DC (type test)
Degree and class of protection
IP degree of protection
IP65/67
Standards, approvals, certificates
Suitable for safety-oriented group deactivation
Yes
Highest safety class achievable in safety mode
• Performance level according to
ISO 13849-1
PL d
• SIL acc. to IEC 61508
SIL 2
Ambient conditions
Ambient temperature during operation
• min.
-25 °C
• max.
55 °C
Connection method
Design of electrical connection for the inputs
and outputs
M12, 5-pole
Power supply
M8, 4-pole
ET-Connection
• ET-Connection
M8, 4-pin, shielded
Dimensions
Width
30 mm
Height
159 mm
Depth 40 mm
Weights
Weight, approx.
145 g