Setting and determining system diagnostics
4.2 Options for displaying system diagnostics
Diagnostics
Function Manual, 09/2016, A5E03735838-AD
33
To display diagnostic information for specific devices even without an offline project, follow
these steps:
1. Establish a connection to the respective CPU.
2. Select the command "Accessible devices" from the "Online" menu.
The "Accessible devices" dialog opens.
Figure 4-4 "Accessible devices" dialog
3. Make the settings for the interface.
4. Select the respective device under "Accessible nodes of the selected interface".
5. Confirm the dialog with the "Display" button.
To Next Page
Loading...
