Siemens SIMATIC ET 200AL - Counting Direction and Stopping; Changing Counting Direction and Stopping Process

Commissioning
8.2 PROFIBUS DP
Distributed I/O system
72 System Manual, 02/2018, A5E31861578-AF
8.2.2
Startup on PROFIBUS DP
Principle of operation
The figure below schematically shows the startup of the ET 200AL distributed I/O system on
the PROFIBUS DP (= DP slave) as a flow chart.
Figure 8-3 Startup of the ET 200AL distributed I/O system on PROFIBUS DP