Siemens SIMATIC ET 200SP CM 1xDALI - Page 123

Glossary
ET 200SP Communication module CM 1xDALI (6ES7137-6CA00-0BU0)
122 Manual, 06/2019, A5E46959434-AA
Prolong time
Time the extended emergency mode lasts after restoration of the mains supply
Report time
If the report timer is set, it shall generate a ‘repeat’ trigger every Treport even if the
"inputValue" has not changed. The report timer shall be restarted every time an event is
sent.
Scene
Configurable preset level
Short address
Type of address used to address an individual control gear in the system
TC
Color type, representing the color of a light source that matches the temperature of a black
body radiator according to Planck’s law.
tDouble
The time which differentiates a single (short) press from a double press
Thermal overload
Scenario where the maximum permissible gear temperature is exceeded
Thermal overload time
Time the thermal overload lasts
tRepeat
The repetition interval of long press repeat events.
tShort
The time which differentiates a short press from a long press.
tStuck
If a button is pressed or bouncing longer than Tstuck, it is considered broken.