Siemens SIMATIC ET 200SP F-AI 4xI 0(4) 20mA 2-/4-wire HF Series - Page 65

Technical specifications
7.1 Technical specifications
Analog input module F-AI 4xI 0(4)..20mA 2-/4-wire HF (6ES7136-6AA00-0CA1)
Manual, 08/2018, A5E41448857-AB
65
Article number
6ES7136-6AA00-0CA1
Address area
Address space per module
• Inputs
14 byte; S7-300/400F CPU, 13 byte
• Outputs
5 byte; S7-300/400F CPU, 4 byte
Hardware configuration
Automatic encoding
• Electronic coding element type F
Yes
Analog inputs
Number of analog inputs
4
• For current measurement
4
permissible input current for current input (destruc-
tion limit), max.
35 mA
Input ranges (rated values), currents
• 0 to 20 mA
Yes
• Input resistance (0 to 20 mA)
125 Ω
• 4 mA to 20 mA
Yes
• Input resistance (4 mA to 20 mA)
125 Ω
Cable length
• shielded, max.
1 000 m
Analog value generation for the inputs
Measurement principle
Sigma Delta
Integration and conversion time/resolution per channel
• Resolution with overrange (bit including sign),
max.
16 bit
• Integration time, parameterizable
Yes
• Integration time (ms)
20 / 16,667
• Interference voltage suppression for interference
frequency f1 in Hz
50 / 60 Hz
Smoothing of measured values
• Number of smoothing levels
7
• parameterizable
Yes
• Step: None
Yes; 1x conversion cycle time
• Step: low
Yes; 2x / 4x conversion cycle time
• Step: Medium
Yes; 8x / 16x conversion cycle time
• Step: High
Yes; 32x / 64x conversion cycle time