Samples
12-2
FM 351 Positioning Module
C79000-G7076-C351-02
12.1 Introduction
When you install the FM 351/FM 451 configuration package, a sample project is
also installed that illustrates several typical applications based on a number of
selected functions.
The English sample project is in the following folder:
...\STEP7\EXAMPLES\zEn18_01
This contains several S7 programs of varying complexity and with different aims.
The programs include comprehensive comments.
12.2 Requirements
The following requirements must be met:
• You have created and wired up an S7 station consisting of a power supply
module, a CPU, and an FM 351 module, (version ≥ 3) or FM 451 (version ≥ 2).
Earlier versions of the module may deviate from the behavior described.
• You have correctly installed STEP 7 and the configuration package for the
FMx51 on your programming device/PC. The description of how to handle the
programs is based on STEP 7 V5.0. If you use a different version of STEP 7,
the procedures may differ slightly.
• The programming device is connected to the CPU.
You can operate an FM 351 or an FM 451 with these samples.
To Next Page
Loading...
