7-1
FM 351 Positioning Module
C79000-G7076-C351-02
Putting the FM 351 into Operation
Important Note
Please read the points in the following warning carefully.
!
Warning
Injury to persons and damage to equipment can occur.
To prevent personal injury and material damage, please note the following points:
• Install an EMERGENCY STOP switch in the vicinity of the computer. This is the
only means of ensuring that the system can be switched off safely in the event
of a computer or software failure.
• Install a hardware limit switch directly connected to the power units of all
drives.
• Make sure that nobody can obtain access to the area of the system that
contains moving parts.
• Controlling and monitoring the FM 351 from within your program and from the
“Test > Commission” dialog at the same time can lead to conflicts with
unforeseeable effects. For this reason, always switch the CPU to STOP when
you work in the Test dialog or deactivate your program.
7
To Next Page
Loading...
