Siemens SIMATIC Ident - Page 34

Setting parameters for blocks
3.4 Programming Ident blocks
Ident profile and Ident blocks, standard function for Ident systems
34 Function Manual, 10/2018, C79000-G8976-C387-04
Parameter
Data type
Default values
Description
NUMBER_TAGS Int 0 Number of transponders in the anten-
na field
LEN_DATA Word W#16#0 Length of the valid data
During command processing = 0
Event display
The following data types are not displayed in the TIA Portal for a newly created project in the
selection list of the data types. To be able to use these data types, you must manually enter
the name of the data type (e.g. "IID_IN_I_81"). After the first use, the data type is
automatically listed in the project and also in the selection list.
Results for MOBY U
Table 3- 12 ATTRIBUTE "0x00" (data type "IID_INVENT_00_MOBY_U")
Name
Type
Comment
number MDS
WORD
Number of MDS
UID length
WORD
length of UID
UID
ARRAY[1..12] of
IID IN I 8BYTE
UID[1]
IID_IN_I_8BYTE
UID
ARRAY[1..8] of BYTE
UID[1]
BYTE
UID[2]
BYTE
UID[3]
BYTE
UID[4]
BYTE
UID[5]
BYTE
UID[6]
BYTE
UID[7]
BYTE
UID[8]
BYTE
UID[2]
"IID_IN_I_8BYTE"
UID[3]
"IID_IN_I_8BYTE"
UID[4]
"IID_IN_I_8BYTE"
UID[5]
"IID_IN_I_8BYTE"
UID[6]
"IID_IN_I_8BYTE"
UID[7]
"IID_IN_I_8BYTE"
UID[8]
"IID_IN_I_8BYTE"
UID[9]
"IID_IN_I_8BYTE"
UID[10]
"IID_IN_I_8BYTE"
UID[11]
"IID_IN_I_8BYTE"
UID[12]
"IID_IN_I_8BYTE"