Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
5
The interface to the communication services is implemented by readymade program blocks
for your user program (FCs and FBs). This manual contains descriptions of the Ident blocks
and the Ident profile with which you can commission and assign parameters for the various
Ident systems.
It is intended for programmers and testers as well as service and maintenance technicians.
Scope of this documentation
This documentation is valid for the Ident profile or Ident blocks and describes the library
version V5.2.
Description of the Ident profile or the Ident blocks in the TIA Portal as of V14 SP1
You will find the new features of the Ident profile or Ident blocks (library version as of V5.0)
in conjunction with the technology object "SIMATIC Ident" described in the TIA Portal help.
→ TIA Portal help, search for: Technology object "SIMATIC Ident"
Documentation classification
You will find further information on the blocks and Ident devices named in this manual on the
Internet (http://support.automation.siemens.com/WW/view/en/43532183/133300
) in the
following manuals:
● FB 45
● FB 55
● SIMATIC RF620R/RF630R
● SIMATIC RF615R/RF650R/RF680R/RF685R
● Interface module ASM 456
● RF120C communications module
● RF170C communications module
● SIMATIC RF180C
● SIMATIC RF185C/RF185C/RF188C
● SIMATIC MV400
● SIMATIC MV500
To Next Page
Loading...
