Siemens SIMATIC Ident Function Manual

Introduction
Ident profile and Ident blocks, standard function for Ident systems
6 Function Manual, 10/2018, C79000-G8976-C387-04
Specifications
The Ident blocks in the manual are based on the "Proxy Ident Function Block" protocol. You
can obtain the specification of the "Proxy Ident Function Block" from the PROFIBUS User
Organization.
Registered trademarks
The following and possibly other names not identified by the registered trademark sign
®
are
registered trademarks of Siemens AG:
SIMATIC
®
, SIMATIC RF
®
, MOBY
®
, RF-MANAGER
®
, SIMATIC Sensors
®
Abbreviations and naming conventions
The following terms/abbreviations are used synonymously in this document:
Reader
Write/read device (SLG)
Transponder, tag
Mobile data storage (MDS), data carrier
Communications module (CM)
Interface module (ASM)
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
For additional information on industrial security measures that may be implemented, please
visit
Link: (http://www.siemens.com/industrialsecurity
)
Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customers’ exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
Link: (http://www.siemens.com/industrialsecurity
)

Siemens SIMATIC Ident Specifications

General

Brand	Siemens
Model	SIMATIC Ident
Category	Other
Language	English